Students often call them IGCSE Physics grade boundaries, but Cambridge officially calls them grade thresholds. A grade threshold is the minimum mark required for a particular grade in a specific examination series. These thresholds are not fixed percentages: Cambridge sets them after papers have been taken and marked, and the required marks can change from one series to another. Your final Physics 0625 grade also depends on the combination of papers you take and the weighting given to each component.
The basic process is:
Raw Paper Marks → Weighting → Overall Syllabus Mark → Grade Threshold → Final Grade
What Are IGCSE Physics Grade Boundaries?
A grade boundary and a grade threshold usually refer to the same idea in student discussions, but Cambridge uses the term grade threshold.
Cambridge defines it as the minimum number of marks needed to receive a particular grade in a paper or subject. Grade thresholds are published after each examination series, rather than being permanently fixed in advance.
That means there is no universal rule such as:
“80% always equals an A* in IGCSE Physics.”
The mark needed depends on the examination series and the exact combination of components you took.
Why Do IGCSE Physics Grade Thresholds Change?
Cambridge aims to keep the standard of the qualification consistent from year to year, even when individual exam papers differ slightly in difficulty.
When setting thresholds, Cambridge uses a mixture of statistical evidence and professional judgement. Candidate performance and other evidence are considered during the awarding process so that a student demonstrating the same standard of work should receive a comparable grade across different examination series.
Therefore, a lower threshold does not automatically mean that year's qualification was easier, and a higher threshold does not simply mean students were better.
How Are IGCSE Physics 0625 Marks Combined?
All Physics 0625 candidates take three papers.
| Component | Core | Extended | Weighting |
|---|---|---|---|
| Multiple Choice | Paper 1 | Paper 2 | 30% |
| Theory | Paper 3 | Paper 4 | 50% |
| Practical skills | Paper 5 or 6 | Paper 5 or 6 | 20% |
The current 2026–2028 Physics 0625 syllabus confirms that Multiple Choice contributes 30%, Theory contributes 50%, and either the Practical Test or Alternative to Practical contributes 20%.
So you should not simply average the percentages from your three papers.
Cambridge weights the components before combining them into your overall syllabus mark. Your final grade is then determined by comparing that total with the threshold for your exact component combination.
Raw Marks vs Weighted Marks
A raw mark is the actual number of marks awarded on a paper.
For example, Paper 2 has a maximum raw mark of 40, while Paper 4 has a maximum raw mark of 80.
A weighted mark reflects how much that paper contributes to the complete qualification. Cambridge applies weighting so that each component contributes the percentage stated in the syllabus.
For Physics 0625, the June 2026 threshold table shows that valid three-paper combinations are compared on a maximum weighted total of 200 marks.
This weighting matters because the 80-mark Theory paper contributes 50% of your qualification, while the 40-mark practical paper contributes 20%.
Component Thresholds vs Overall Grade Thresholds
Cambridge threshold documents contain two different types of information.
Component Grade Thresholds
These show the minimum raw mark associated with grades on an individual component.
However, A* does not exist at individual component level. Cambridge explicitly states that A* is awarded at syllabus level.
Syllabus Grade Thresholds
These apply to the complete valid combination of papers you took.
For example, an Extended candidate could have the combination:
21 + 41 + 51
while another could have:
22 + 42 + 62
Those combinations can have different thresholds.
Your final Physics grade comes from your overall weighted syllabus mark, not from averaging individual component grades.
Core vs Extended Grade Thresholds
Core and Extended candidates do not use the same paper combinations.
Core candidates take Paper 1, Paper 3 and Paper 5 or 6 and can achieve grades C to G.
Extended candidates take Paper 2, Paper 4 and Paper 5 or 6 and can achieve grades A* to G.
This is why you should never compare a Core threshold directly with an Extended threshold without checking which components were taken.
How to Read an IGCSE Physics Grade Threshold Table
When you open a Cambridge Physics 0625 threshold document:
- Check the examination series.
- Confirm the syllabus code is 0625.
- Find your exact component combination.
- Check the maximum weighted mark.
- Find the grade column you want.
- Read the minimum mark required.
Make sure you are reading the syllabus combination table, not only an individual component table.
For example, Cambridge's June 2026 table includes separate rows for combinations such as 21, 41, 51 and 21, 41, 61, because the practical component differs.
Are IGCSE Physics Grade Boundaries Fixed?
No.
Grade thresholds can change between:
- March, June and November examination series
- Different paper variants
- Different valid component combinations
Therefore:
Last year's threshold ≠ this year's guaranteed threshold
Cambridge only sets thresholds after papers have been sat and marked.
Current IGCSE Physics 0625 Grade Thresholds
As of 14 September 2026, Cambridge has officially published Physics 0625 grade-threshold tables for both the March 2026 and June 2026 examination series. The November 2026 thresholds are not yet published.
Last verified: 14 September 2026
Here are two examples from the official June 2026 table:
| Combination | Route | A* | A | B | C |
|---|---|---|---|---|---|
| 21, 41, 51 | Extended | 162 | 137 | 112 | 88 |
| 11, 31, 51 | Core | — | — | — | 105 |
Both combinations have a maximum weighted mark of 200. Core candidates do not have A*, A or B thresholds because their maximum available syllabus grade is C.
These numbers apply only to those exact June 2026 component combinations. Other variants have different thresholds.
Can You Predict Your Physics Grade Before Results Day?
You can make a rough estimate, but you cannot know your official grade in advance.
You might compare your estimated marks with thresholds from previous years, but the current series can have different thresholds. Cambridge cannot publish the official thresholds until marking and awarding are complete.
Treat unofficial “predicted grade boundaries” on social media or revision websites as estimates rather than confirmed Cambridge information.
How Should You Use Previous Grade Thresholds?
Historical thresholds can help you:
- Understand the range seen in previous series
- Interpret Mock Exam results
- See how thresholds can move
- Practise converting weighted marks into possible grades
But they should not be used to decide that you have already “done enough” for a particular grade.
Previous thresholds are context, not a target Cambridge has promised for your exam.
Conclusion
IGCSE Physics 0625 grade boundaries work through:
Marks → Weighting → Component Combination → Grade Threshold → Final Grade
Your individual paper marks are weighted and combined, then compared with the threshold for the exact component combination you took. Because thresholds can change between examination series, previous tables should be used as historical context rather than guaranteed targets.
Once Cambridge publishes the thresholds for your own series, compare them only with your correct Physics 0625 option. For what happens after grades are released, continue to the IGCSE Physics Results Day Guide.
Frequently Asked Questions About IGCSE Physics Grade Boundaries
What is the A* boundary for IGCSE Physics 0625?
There is no single permanent A* boundary. It depends on the examination series and your exact Extended component combination. For example, June 2026 combination 21, 41, 51 had an A* threshold of 162 out of 200 weighted marks.
Is 80% always an A* in IGCSE Physics?
No. Cambridge grade thresholds are not fixed percentages and can change between examination series and component combinations.
Why are grade boundaries lower in some years?
Thresholds help maintain comparable grading standards when exam papers vary in difficulty. Cambridge uses statistical evidence and professional judgement when setting them.
Are Physics paper marks weighted?
Yes. For the current syllabus, Multiple Choice contributes 30%, Theory 50% and practical assessment 20%.
Do Core and Extended candidates have the same boundaries?
No. They take different component combinations. Core candidates can achieve grades C–G, while Extended candidates are eligible for A*–G.
Can I use last year's grade boundary to predict my grade?
Only as a rough historical reference. The exact threshold for your series cannot be known until Cambridge completes marking and awarding.
Where can I find official Physics 0625 grade thresholds?
Cambridge publishes official IGCSE threshold tables for each examination series on its Grade Threshold Tables page.




